Characteristics

	Cover	black synthetic rubber extremely resistant to abrasion and to oils and weather conditions.
	Reinforcement	four high tensile steel spirals up to 3/8", six spirals 1/2"
	Tube	synthetic rubber resistant to oils.

	INTERNAL DIAMETER				REINF. OUTSIDE DIAMETER		OUTSIDE DIAMETER		WORKING PRESSURE		MINIMUM BURST PRESSURE		MINIMUM BEND RADIUS		WEIGHT
Catalog Code	DN	size	mm	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	kg/m	lbs/ft
WB13-06-04	6	-4	6.4	1/4	15.4	0.606	18.4	0.724	1,380	20,016	3,450	50,039	125	4.9	0.490	0.329	Versions
	Product code Product description Cover Branding 0WB1306000061 Waterbl 1380 06 DS Std Blk Black White/Blue Request quotation
WB13-10-06	10	-6	9.5	3/8	19.2	0.756	22.2	0.874	1,380	20,016	3,125	45,325	150	5.9	0.710	0.477	Versions
	Product code Product description Cover Branding 0WB1310000061 Waterbl 1380 10 DS Std Blk Black White/Blue Request quotation
WB13-12-08	12	-8	12.7	1/2	25.9	1.020	28.9	1.138	1,380	20,016	2,750	39,886	250	9.8	1.250	0.840	Versions
	Product code Product description Cover Branding 0WB1312000061 Waterbl 1380 12 DS Std Blk Black White/Blue Request quotation

Fluid compatibility

Fluid Level Fluid Level Fluid Level ACETIC ACID n.d. ACETIC ACID (30%) ACETONE ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE ANIMAL OILS BENZOL/BENZENE BUTANE BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d. CARBON DIOXIDE CARBON DISULFIDE CARBONATES CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d. DISEL FUEL ETHERS ETHYL ACETATE ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL GLYCOL TO 66°C HEXANE HYDRAULIC OIL HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.) IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL KEROSENE LIQUID OXYGEN LPG LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS NAPHTHA NAPHTHALENE NATURAL GAS NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN OIL OF TURPENTINE OLEIC ACID OXALIC ACID PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM SEA WATER SILICONE OILS SOAP SOLUTIONS SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20% SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE TRICHLOROETHYLENE VEGETABLE GREASES WATER XYLENE

It corresponds to an excellent chemical resistance, with minimum or no properties changement It corresponds to a limited chemical resistance, with moderately acceptable properties changements It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.