Jack Hose
|
Characteristics
- Constant pressure hose for hydraulic jack applications.
- Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
- Working temperature -40 +100°C (125°C discontinuous).
- Safety Factor 1:2.5.
- Available MSHA version
 |
Cover |
black, synthetic rubber resistant to oils, abrasion and weather conditions. |
|
Reinforcement |
two high tensile steel braids. |
|
Tube |
synthetic rubber resistant to oils. |
|
 |
 |
 |
 |
 |
 |
 |
| INTERNAL DIAMETER |
REINF. OUTSIDE DIAMETER |
OUTSIDE DIAMETER |
WORKING PRESSURE |
MINIMUM BURST PRESSURE |
MINIMUM BEND RADIUS |
WEIGHT |
| Catalog Code |
DN |
size |
mm |
inch |
mm |
inch |
mm |
inch |
bar |
psi |
bar |
psi |
mm |
inch |
kg/m |
lbs/ft |
| JCK-06-04 |
6 |
-4 |
6.4 |
1/4 |
12.7 |
0.500 |
15.2 |
0.598 |
700 |
10,153 |
1,750 |
25,382 |
100 |
3.9 |
0.360 |
0.242 |
Versions |
|
| Product code |
Product description |
Cover |
Branding |
| 0JCK-060010NN |
Jack Hose 06 DS MSHA Blk |
Black |
Neutro/Neutro |
Request quotation |
|
| JCK-10-06 |
10 |
-6 |
9.5 |
3/8 |
16.7 |
0.657 |
19.2 |
0.756 |
700 |
10,153 |
1,750 |
25,382 |
130 |
5.1 |
0.530 |
0.356 |
Versions |
|
| Product code |
Product description |
Cover |
Branding |
| 0JCK-100010NN |
Jack Hose 10 DS MSHA Blk |
Black |
Neutro/Neutro |
Request quotation |
|
Fluid compatibility
|
Fluid |
Level |
Fluid |
Level |
Fluid |
Level |
| ACETIC ACID |
n.d. |
ACETIC ACID (30%) |
 |
ACETONE |
 |
| ACETYLENE |
 |
AMMONIA,GAS (HOT) |
|
AMMONIA,LIQUID |
|
| AMMONIUMCHLORIDE |
n.d. |
AMYL ACETATE |
|
ANILINE |
|
| ANIMAL OILS |
|
BENZOL/BENZENE |
|
BUTANE |
|
| BUTYL ACETATE |
|
BUTYL ALCOHOL/BUTANOL |
|
CALCIUM CHLORIDE SOLUTIONS |
n.d. |
| CARBON DIOXIDE |
|
CARBON DISULFIDE |
|
CARBONATES |
|
| CAUSTIC SODA |
|
CHLORINATED SOLVENTS |
|
CHLORINE |
|
| CHLOROFORM |
|
CITRIC ACID SOLUTIONS |
|
COMPRESSED AIR |
|
| CRUDE PETROLEUM OIL |
|
CYCLOHEXANE |
|
DIOCTYL PHTHALATE |
n.d. |
| DISEL FUEL |
|
ETHERS |
|
ETHYL ACETATE |
|
| ETHYL ALCOHOL |
|
ETHYL CELLULOSE |
|
ETHYL CHLORIDE |
|
| ETHYLENE GLYCOL |
|
ETHYLENEOXIDE |
|
FLUORINE |
|
| FORMALDEHYDE |
|
FORMALDEHYDE 40% |
|
FUEL OIL |
|
| GASEOUS HYDROGEN |
|
GASOLINE |
|
GLYCERIN/GLYCEROL |
|
| GLYCOL TO 66°C |
|
HEXANE |
|
HYDRAULIC OIL |
|
| HYDROCHLORIC ACID 37% |
|
HYDROGER PEROXIDE (CONC.) |
|
HYDROGER PEROXIDE (DIL.) |
|
| IRUS 902 (Hydraulic fluid water-oil emulsion) |
|
ISOCYANATES |
n.d. |
ISOPROPIL ALCOHOL |
|
| KEROSENE |
|
LIQUID OXYGEN |
|
LPG |
|
| LUBRIFICATING OILS |
|
MERCURY |
|
METHYL ALCOHOL/METHANOL |
|
| METHYL CHLORIDE ( COLD ) |
|
METHYL ETHYL KHETONE |
|
MINERAL OILS |
|
| NAPHTHA |
|
NAPHTHALENE |
|
NATURAL GAS |
|
| NITRIC ACID (CONC.) |
|
NITRIC ACID (DIL.) |
|
NITROBENZEN |
|
| OIL OF TURPENTINE |
|
OLEIC ACID |
|
OXALIC ACID |
|
| PERCHLOROETHYLENE |
|
PHENOL |
|
PHOSPHATE ESTER BASE OIL |
|
| PHOSPHORIC ACID (10%) |
|
PHOSPHORIC ACID (70%) |
|
SATURATED STEAM |
|
| SEA WATER |
|
SILICONE OILS |
|
SOAP SOLUTIONS |
|
| SODA |
|
SODIUM CHLORIDE SOLUTIONS |
|
SODIUM HYDROXIDE 20% |
|
| SODIUM HYPOCHLORYDE 10% |
|
SULPHUR |
|
SULPHUR DIOXIDE |
|
| SULPHURIC ACID ABOVE 50% |
|
SULPHURIC ACID UP TO 50% |
|
TOLUENE |
|
| TRICHLOROETHYLENE |
|
VEGETABLE GREASES |
|
WATER |
|
| XYLENE |
|
|
|
|
|
|
|
It corresponds to an excellent chemical resistance, with minimum or no properties changement |
|
It corresponds to a limited chemical resistance, with moderately acceptable properties changements |
|
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics |
This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.
|
|
|