Hot water Thin cover 250
HOT WATER 250 THIN COVER

Characteristics

  • High pressure hose for cleaners.
  • Suitable for passage of water and detergents in aqueous solution.
  • Working temperature -40 +150°C.
  • Safety factor 1:4 (according to IEC 335-2).

Cover black synthetic rubber resistant to abrasion, oils and weather conditions.
Reinforcement one high tensile steel braid.
Tube synthetic rubber resistant to water and detergents in aqueous solution.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
250T-06-04 6 -4 6.4 1/4 11.1 0.437 13.1 0.516 250 3,626 1,000 14,504 100 3.9 0.210 0.141 Versions
250T-08-05 8 -5 7.9 5/16 12.7 0.500 14.7 0.579 250 3,626 1,000 14,504 110 4.3 0.260 0.175 Versions
250T-10-06 10 -6 9.5 3/8 15.1 0.594 17.1 0.673 250 3,626 1,000 14,504 120 4.7 0.360 0.242 Versions
250T-12-08 12 -8 12.7 1/2 18.3 0.720 20.4 0.803 210 3,046 840 12,183 160 6.3 0.450 0.302 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.