Fortius
SAE 100 R16

Characteristics

  • One steel braid hose with extremely good performances for hydraulic applications, usable with a reduced bend radius.
  • Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
  • Working temperature -40 +100°C (125°C discontinuous).

Cover black, synthetic rubber resistant to oils, abrasion and weather conditions.
Reinforcement one high tensile steel braid.
Tube synthetic rubber resistant to oils.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
11F-05-03 5 -3 4.8 3/16 9.7 0.382 11.7 0.461 350 5,076 1,400 20,306 44 1.7 0.210 0.141 Versions
11F-06-04 6 -4 6.4 1/4 11.2 0.441 13.2 0.520 345 5,004 1,380 20,016 51 2.0 0.250 0.168 Versions
11F-08-05 8 -5 7.9 5/16 12.5 0.492 14.6 0.575 295 4,279 1,180 17,115 57 2.2 0.270 0.181 Versions
11F-10-06 10 -6 9.5 3/8 14.6 0.575 16.6 0.654 275 3,989 1,100 15,954 63 2.5 0.330 0.222 Versions
11F-12-08 12 -8 12.7 1/2 17.6 0.693 19.8 0.780 240 3,481 960 13,924 89 3.5 0.410 0.276 Versions
11F-16-10 16 -10 15.9 5/8 20.6 0.811 22.9 0.902 190 2,756 760 11,023 102 4.0 0.475 0.319 Versions
11F-19-12 19 -12 19.0 3/4 24.4 0.961 26.5 1.043 155 2,248 620 8,992 121 4.8 0.575 0.386 Versions
11F-25-16 25 -16 25.4 1 32.5 1.280 34.7 1.366 140 2,031 560 8,122 152 6.0 0.720 0.484 Versions
11F-31-20 31 -20 31.8 1.1/4 39.6 1.559 42.2 1.661 112 1,624 450 6,527 210 8.3 1.120 0.753 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.