Fahrenheit 302/5
HIGH TEMPERATURE

Characteristics

  • High temperature hose at low, medium pressure for hydraulic applications.
  • Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
  • Working temperature -40 +135°C (150°C discontinuous) except air not higher than 121°C.

Cover one blue polyester textile braid.
Reinforcement one textile braid, one high tensile steel braid.
Tube synthetic rubber resistant to oils.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
5FF-05-04 5 -4 4.8 3/16 - - 13.2 0.520 207 3,002 828 12,009 76 3.0 0.220 0.148 Versions
5FF-06-05 6 -5 6.4 1/4 - - 14.8 0.583 207 3,002 828 12,009 86 3.4 0.260 0.175 Versions
5FF-08-06 8 -6 7.9 5/16 - - 17.1 0.673 155 2,248 620 8,992 102 4.0 0.305 0.205 Versions
5FF-10-08 10 -8 10.3 13/32 - - 19.4 0.764 138 2,002 552 8,006 117 4.6 0.360 0.242 Versions
5FF-12-10 12 -10 12.7 1/2 - - 23.4 0.921 121 1,755 483 7,005 140 5.5 0.530 0.356 Versions
5FF-16-12 16 -12 15.9 5/8 - - 27.4 1.079 103 1,494 414 6,005 165 6.5 0.650 0.437 Versions
5FF-22-16 22 -16 22.2 7/8 - - 31.3 1.232 55 798 221 3,205 187 7.4 0.625 0.420 Versions
5FF-28-20 28 -20 28.6 1.1/8 - - 38.1 1.500 43 624 172 2,495 229 9.0 0.900 0.605 Versions
5FF-35-24 35 -24 34.9 1.3/8 - - 44.4 1.748 34 493 138 2,002 267 10.5 1.000 0.672 Versions
5FF-46-32 46 -32 46.0 1.13/16 - - 56.2 2.213 24 348 97 1,407 337 13.3 1.480 0.995 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.