Fahrenheit 302/162
HIGH TEMPERATURE

Characteristics

  • Two steel braids hose for high temperature with extremely good performances for hydraulic applications, usable with a reduced bend radius.
  • Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
  • Working temperature -40 +135°C (150°C discontinuous) except air not higher than 121°C.

Cover blue, synthetic rubber resistant to oils, abrasion and weather conditions. MSHA approved
Reinforcement two high tensile steel braids
Tube synthetic rubber resistant to oils

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
16F2-06-04 6 -4 6.4 1/4 11.6 0.457 13.2 0.520 345 5,004 1,379 20,001 51 2.0 0.300 0.202 Versions
16F2-08-05 8 -5 7.9 5/16 12.9 0.508 14.5 0.571 295 4,279 1,180 17,115 57 2.2 0.330 0.222 Versions
16F2-10-06 10 -6 9.5 3/8 15.4 0.606 17.0 0.669 275 3,989 1,100 15,954 63 2.5 0.430 0.289 Versions
16F2-12-08 12 -8 12.7 1/2 18.3 0.720 20.3 0.799 240 3,481 960 13,924 89 3.5 0.550 0.370 Versions
16F2-16-10 16 -10 15.9 5/8 22.1 0.870 23.9 0.941 190 2,756 760 11,023 102 4.0 0.630 0.423 Versions
16F2-19-12 19 -12 19.0 3/4 25.6 1.008 27.7 1.091 155 2,248 620 8,992 121 4.8 0.800 0.538 Versions
16F2-25-16 25 -16 25.4 1 32.3 1.272 34.6 1.362 140 2,031 560 8,122 152 6.0 1.170 0.786 Versions
16F2-31-20 31 -20 31.8 1.1/4 39.6 1.559 42.6 1.677 112 1,624 448 6,498 210 8.3 1.480 0.995 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.