Fahrenheit 302/1
HIGH TEMPERATURE

Characteristics

  • High temperature hose at low, medium, high pressure for hydraulic applications.
  • Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
  • Working temperature -40 +135°C (150°C discontinuous) except air not higher than 121°C.

Cover blue, synthetic rubber resistant to oils, abrasion and weather conditions. MSHA approved.
Reinforcement one high tensile steel braid.
Tube synthetic rubber resistant to oils.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
1FF-05-03 5 -3 4.8 3/16 9.5 0.374 11.8 0.465 250 3,626 1,000 14,504 90 3.5 0.180 0.121 Versions
1FF-06-04 6 -4 6.4 1/4 11.1 0.437 13.4 0.528 225 3,263 900 13,054 100 3.9 0.230 0.155 Versions
1FF-08-05 8 -5 7.9 5/16 12.7 0.500 15.0 0.591 215 3,118 900 13,054 115 4.5 0.265 0.178 Versions
1FF-10-06 10 -6 9.5 3/8 15.1 0.594 17.4 0.685 180 2,611 720 10,443 130 5.1 0.325 0.218 Versions
1FF-12-08 12 -8 12.7 1/2 18.3 0.720 20.5 0.807 160 2,321 640 9,283 180 7.1 0.410 0.276 Versions
1FF-16-10 16 -10 15.9 5/8 21.4 0.843 23.7 0.933 130 1,886 520 7,542 200 7.9 0.475 0.319 Versions
1FF-19-12 19 -12 19.0 3/4 25.4 1.000 27.7 1.091 105 1,523 480 6,962 240 9.4 0.610 0.410 Versions
1FF-25-16 25 -16 25.4 1 33.3 1.311 35.8 1.409 88 1,276 360 5,221 300 11.8 0.940 0.632 Versions
1FF-31-20 31 -20 31.8 1.1/4 40.5 1.594 43.5 1.713 63 914 250 3,626 420 16.5 1.190 0.800 Versions
1FF-38-24 38 -24 38.1 1.1/2 46.8 1.843 50.5 1.988 50 725 200 2,901 500 19.7 1.600 1.075 Versions
1FF-51-32 51 -32 50.8 2 60.2 2.370 63.9 2.516 40 580 160 2,321 630 24.8 2.200 1.478 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.