DS9-AT
SAE 100 R9-AT

Characteristics

  • Pulsing pressure hose with extremely good performances for hydraulic applications.
  • Suitable for passage of mineral and vegetable oils, aqueous emulsions, water, air and inert gases.
  • Working temperature -40 +100°C (125°C discontinuous).

Cover black synthetic rubber resistant to abrasion, oils and weather conditions.
Reinforcement four high tensile steel spirals.
Tube synthetic rubber resistant to oils.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
9AT-10-06 10 -6 9.5 3/8 17.2 0.677 19.7 0.776 310 4,496 1,240 17,985 127 5.0 0.630 0.423 Versions
9AT-12-08 12 -8 12.7 1/2 20.5 0.807 22.9 0.902 280 4,061 1,120 16,244 178 7.0 0.730 0.491 Versions
9AT-19-12 19 -12 19.0 3/4 27.5 1.083 30.2 1.189 210 3,046 840 12,183 240 9.4 1.160 0.779 Versions
9AT-25-16 25 -16 25.4 1 34.9 1.374 38.2 1.504 210 3,046 840 12,183 305 12.0 1.680 1.129 Versions
9AT-31-20 31 -20 31.8 1.1/4 43.6 1.717 46.8 1.843 210 3,046 840 12,183 420 16.5 2.650 1.781 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID n.d. ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) AMMONIA,LIQUID
AMMONIUMCHLORIDE n.d. AMYL ACETATE ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE BUTYL ALCOHOL/BUTANOL CALCIUM CHLORIDE SOLUTIONS n.d.
CARBON DIOXIDE CARBON DISULFIDE CARBONATES
CAUSTIC SODA CHLORINATED SOLVENTS CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE n.d.
DISEL FUEL ETHERS ETHYL ACETATE
ETHYL ALCOHOL ETHYL CELLULOSE ETHYL CHLORIDE
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE FORMALDEHYDE 40% FUEL OIL
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) HYDROGER PEROXIDE (DIL.)
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES n.d. ISOPROPIL ALCOHOL
KEROSENE LIQUID OXYGEN LPG
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL
PHOSPHORIC ACID (10%) PHOSPHORIC ACID (70%) SATURATED STEAM
SEA WATER SILICONE OILS SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20%
SODIUM HYPOCHLORYDE 10% SULPHUR SULPHUR DIOXIDE
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.