DS7
SAE 100 R7 · EN 855 R7

Characteristics

  • Low, medium thermoplastic hose for hydraulic applications, (also available in twin hose version).
  • Suitable for passage of petroleum based products, water based solutions, air, mineral and vegetable oils.
  • Working temperature: -50 +100°C (aqueous solution), -40 +70°C (water, air, petroleum based products, mineral and vegetable oils).

Cover black, thermoplastic polyurethane extremely resistant to abrasion, oils and weather conditions.
Reinforcement two high tensile polyester braids.
Tube thermoplastic polyester resistant to oils.

INTERNAL DIAMETER REINF. OUTSIDE DIAMETER OUTSIDE DIAMETER WORKING PRESSURE MINIMUM BURST PRESSURE MINIMUM BEND RADIUS WEIGHT
Catalog Code DN size mm inch mm inch mm inch bar psi bar psi mm inch kg/m lbs/ft
107-05-03 5 -3 4.8 3/16 - - 10.0 0.394 210 3,046 840 12,183 35 1.4 0.075 0.050 Versions
107-06-04 6 -4 6.4 1/4 - - 11.5 0.453 200 2,901 800 11,603 50 2.0 0.090 0.060 Versions
107-08-05 8 -5 7.9 5/16 - - 14.3 0.563 190 2,756 760 11,023 55 2.2 0.140 0.094 Versions
107-10-06 10 -6 9.5 3/8 - - 16.2 0.638 175 2,538 700 10,153 75 3.0 0.160 0.108 Versions
107-12-08 12 -8 12.7 1/2 - - 20.4 0.803 140 2,031 560 8,122 95 3.7 0.240 0.161 Versions
107-16-10 16 -10 15.9 5/8 - - 23.6 0.929 105 1,523 420 6,092 125 4.9 0.280 0.188 Versions
107-19-12 19 -12 19.0 3/4 - - 26.5 1.043 86 1,247 344 4,989 150 5.9 0.330 0.222 Versions
107-25-16 25 -16 25.4 1 - - 33.0 1.299 69 1,001 276 4,003 200 7.9 0.450 0.302 Versions

Fluid compatibility

Fluid Level Fluid Level Fluid Level
ACETIC ACID ACETIC ACID (30%) ACETONE
ACETYLENE AMMONIA,GAS (HOT) n.d. AMMONIA,LIQUID
AMMONIUMCHLORIDE AMYL ACETATE n.d. ANILINE
ANIMAL OILS BENZOL/BENZENE BUTANE
BUTYL ACETATE n.d. BUTYL ALCOHOL/BUTANOL n.d. CALCIUM CHLORIDE SOLUTIONS
CARBON DIOXIDE n.d. CARBON DISULFIDE n.d. CARBONATES n.d.
CAUSTIC SODA n.d. CHLORINATED SOLVENTS n.d. CHLORINE
CHLOROFORM CITRIC ACID SOLUTIONS COMPRESSED AIR
CRUDE PETROLEUM OIL CYCLOHEXANE DIOCTYL PHTHALATE
DISEL FUEL ETHERS n.d. ETHYL ACETATE n.d.
ETHYL ALCOHOL ETHYL CELLULOSE n.d. ETHYL CHLORIDE n.d.
ETHYLENE GLYCOL ETHYLENEOXIDE FLUORINE
FORMALDEHYDE n.d. FORMALDEHYDE 40% FUEL OIL n.d.
GASEOUS HYDROGEN GASOLINE GLYCERIN/GLYCEROL
GLYCOL TO 66°C HEXANE HYDRAULIC OIL n.d.
HYDROCHLORIC ACID 37% HYDROGER PEROXIDE (CONC.) n.d. HYDROGER PEROXIDE (DIL.) n.d.
IRUS 902 (Hydraulic fluid water-oil emulsion) ISOCYANATES ISOPROPIL ALCOHOL n.d.
KEROSENE LIQUID OXYGEN n.d. LPG n.d.
LUBRIFICATING OILS MERCURY METHYL ALCOHOL/METHANOL
METHYL CHLORIDE ( COLD ) METHYL ETHYL KHETONE MINERAL OILS
NAPHTHA NAPHTHALENE NATURAL GAS n.d.
NITRIC ACID (CONC.) NITRIC ACID (DIL.) NITROBENZEN
OIL OF TURPENTINE OLEIC ACID OXALIC ACID n.d.
PERCHLOROETHYLENE PHENOL PHOSPHATE ESTER BASE OIL n.d.
PHOSPHORIC ACID (10%) n.d. PHOSPHORIC ACID (70%) n.d. SATURATED STEAM n.d.
SEA WATER SILICONE OILS n.d. SOAP SOLUTIONS
SODA SODIUM CHLORIDE SOLUTIONS SODIUM HYDROXIDE 20% n.d.
SODIUM HYPOCHLORYDE 10% n.d. SULPHUR SULPHUR DIOXIDE n.d.
SULPHURIC ACID ABOVE 50% SULPHURIC ACID UP TO 50% TOLUENE
TRICHLOROETHYLENE VEGETABLE GREASES n.d. WATER
XYLENE
It corresponds to an excellent chemical resistance, with minimum or no properties changement
It corresponds to a limited chemical resistance, with moderately acceptable properties changements
It corresponds to an inadequate behaviour, with drastic collapse of all the charachteristics

This chart is intended as a guide only and is not a guarantee. Final selection of the proper material or components is further dependent on many factors including pressure, fluid, ambient temperature, concentration, duration of exposure, etc.